Table of Contents
Advertisement
Connecting the CF4680 to a Host
By default, the CF4680 is in USB PC Keyboard interface.
1.
Connect a standard USB cable (standard USB-A to USB-B)
to the CF4680 and to the USB port on the host.
2.
Power-up the host.
3.
Verify that the CF4680 is on by presenting a bar code in
front of the scan window. The white LED should turn on and
read the bar code.
Note: The CF4680 does not beep to indicate a good read unless
this has been setup by the user with the user feedback pins.
See the CF4680 Installation Guide for more details
(available from your local Honeywell OEM representative).
5
Advertisement
Table of Contents
