Electronic Oven Control; Displays; Selector And Set Control Knobs; Enter And Cancel - KitchenAid KDRP467KSS Use And Care Manual

ELECTRONIC OVEN CONTROL

1. Display

Displays

When power is first supplied to the appliance, "PF" will appear.
Any other time "PF" appears, a power failure has occurred. Turn
the SELECTOR control knob to the RESET position, press the
enter key, and follow the clock setting instructions in the "Clock"
section.

Selector and Set Control Knobs

All cooking functions are set with the SELECTOR control knob.
The selected function will automatically begin with current
settings after 10 seconds if other settings are not changed. Once
a cycle is complete, turn the SELECTOR control knob to the
RESET position to select a new function.
All temperature or time adjustments are set with the SET control
knob. All temperature adjustments are displayed in 5°F (3°C)
increments.
The speed with which the knob is turned is reflected on the
display.
PREHEAT 0%
1
DURATION
SELECTOR
2
2. Selector Control Knob
100%
KEEP WARM
BROWNING
STOP

CLOCK

TIME
SET
ENTER
CANCEL
3
3. Set Control Knob

Enter and Cancel

The ENTER button begins any oven function.
The CANCEL button stops any oven function except for the
Clock/Time of Day. After canceling an operation, "End" will be
displayed to show the function was cancelled.
The cooling fan might continue operating after a function has
ended, but will shut off automatically when the oven has cooled.
This is a 12 hour clock and does not show a.m. or p.m.
To Set:
1. Turn the SELECTOR knob to the RESET position.
2. Press the ENTER button until the display shows "12:00" and
the CLOCK indicator is blinking.
3. Turn the SET knob to set the time of day.
4. Press the ENTER button to accept time on display.
To Change: Repeat steps 2-4 to change time of day to the
display.
Clock
9