GREAT PLAINS Ultra-Chisel 6321UC Adjustment Manual

Tillage

Hide thumbs Also See for Ultra-Chisel 6321UC:

Table of Contents

Download this manual

Document #

TLUS400C-0001A

Models Affected:

6321UC, 6323UC, 6327UC, 6329UC, 6330UC, 6332UC, 6536UC, 6538UC,

6542UC, 6544UC

General Information

Proper servicing and adjustment is the key to the long life of all farm equipment. With careful and

systematic inspection of equipment, costly maintenance, time and repair can be avoided. The fol-

lowing information will assist with recommended servicing and adjustments:

48649

FIELD ADJUSTMENT GUIDE

Ultra-Chisel

Date: December 1, 2014

1 of 3

Tillage

Document

#TLUS400C-0001A

Table of Contents

Do you have a question about the Ultra-Chisel 6321UC and is the answer not in the manual?

Page 1 FIELD ADJUSTMENT GUIDE Tillage Ultra-Chisel Date: December 1, 2014 Document # TLUS400C-0001A Models Affected: 6321UC, 6323UC, 6327UC, 6329UC, 6330UC, 6332UC, 6536UC, 6538UC, 6542UC, 6544UC General Information Proper servicing and adjustment is the key to the long life of all farm equipment. With careful and systematic inspection of equipment, costly maintenance, time and repair can be avoided.
Page 2 Unfolding The Implement: 1) Be aware of the vertical and horizontal clearances needed to unfold the implement. 2) Remove the transport wing pins and store them in their des- ignated spots. 3) Put the track in Park and slowly begin to unfold the imple- ment while watching for any signs of leaks or loose fittings.
Page 3 Hydraulic Depth Stop: The hydraulic depth stop will maintain constant depth every time the implement is raised and low- ered. Adjust the per the following: 1) Simply screw the depth stop handle in to run the implement shallower. Unscrewing the depth stop handle will allow for the implement to run deeper.