Table of Contents
Advertisement
Main menu "CRANE", proportional functions
The sub-menus in "CRANE" mode are configured
when the crane is fitted to the vehicle. The right and
left side displays show symbols representing the
functions controlled by the corresponding levers.
When the crane menu changes, the symbols and
texts change to match the functions available via the
current menu.
2
1
"CRANE MENU" BUTTON
The left-hand button in the top row on the bar, facing
towards the operator. When the operator pulls out the
start button on the hand controller, it always starts in
menu CRANE 1.
Left side display
The symbols are stored in a symbol library. If the library does
not contain the required symbol, a description of the function
can be written instead. Only Arabic numerals and letters from
the English alphabet can be used.
Symbols and texts can be configured via the safety system if it
is an EU crane. "OS" cranes can be configured by a computer
or delivered with a default configuration set in the factory.
Centre display
9
Right side display
Advertisement
Table of Contents
