Table of Contents
Advertisement
Introduction
Olsbergs radio remote control system has been devel-
oped to provide operators with continual feedback via
its display whenever they activate a lever or button on
the hand controller. The hand controller's standard
menu selection system utilises the display to provide
the operator with real time information about the
chosen menu, battery status, reception conditions etc.
The hand controller contains a two-way communication
radio enabling information to be sent both to it and from
it. The radio decoder contains a corresponding unit to
handle traffic at the other end.
The hand controller utilises bluetooth radio and therefore
operates in the 2.4GHz band, which is a free band that
has been approved practically worldwide. This means
that no license is needed and the radio can in principle be
used everywhere including over national boundaries.
The side displays show the symbol for the function each
lever activates in the chosen menu. When the operator
changes menu, the symbols change to the functions that
become active.
The centre display provides information about which
menu has been chosen, as well as indicating the radio
reception conditions, battery status, fault information,
micro, manual extension and so on.
SAFETY PHILOSOPHY
The control system fulfils stringent safety
requirements in terms of reliability and
operational safety.
The products are CE-marked and approved
in accordance with machinery directive
2006/42/EG.
The system conforms to ISO 13849-1:2006
category 3 PLd.
3
Advertisement
Table of Contents
