Table of Contents
Advertisement
Regulatory Compliance Notices
Power Cords
The power cord set included in your server meets the requirements for use in the
country where you purchased your server. If you need to use this server in another
country, you should purchase a power cord that is approved for use in that country.
The power cord must be rated for the product and for the voltage and current marked
on the product's electrical ratings label. The voltage and current rating of the cord
should be greater than the voltage and current rating marked on the product. In
addition, the cross sectional area of the wire must be a minimum of 1.00 mm² or
18AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6
m). If you have questions about the type of power cord to use, contact your Compaq
authorized service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by
items placed upon it or against it. Particular attention should be paid to the plug,
electrical outlet, and the point where the cord exits from the product.
Canadian Notice (Avis Canadien)
Class A Equipment
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur
le matériel brouilleur du Canada.
Class B Equipment
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur
le matériel brouilleur du Canada.
B-4
Network Storage Router N1200 Installation Guide
Advertisement
Table of Contents
