Table of Contents
Advertisement
Installation
View From
Opposite Side
2
Spring Latch
Front of Inner
Rail
Circular Grasping Hole
Figure 2-1: Separating the inner and outer rails
d. Repeat Step 3 to separate the other set of rails.
4. Attach the front-end and back-end of each outer rail assembly to the rack.
a. Determine the location in the rack for the router.
NOTE: The size of the router and its rail assembly is 1U.
b. Align the three screw holes on the front-end of the outer rail assembly with
the equally spaced holes on the front of the rack.
All three holes must be aligned exactly. If the holes do not exactly match up,
the outer rail assembly is not positioned correctly on the rack. See Figure 2-2
for an example of rack front styles and hole alignments.
2-4
3
Front of Outer
Rail
1
Extension
Bracket
Network Storage Router N1200 Installation Guide
Advertisement
Table of Contents
