Page 1
ApneaLink™ Systems ApneaLink Plus ApneaLink Quick Setup Guide English, Deutsch, Français, Italiano, Español, Português, Svenska, Nederlands...
Page 2
ApneaLink™ Quick Setup Guide Important Notes Do not connect the recorder to your computer until prompted to do so by the ApneaLink software. This is essential in order to ensure the correct installation of the USB driver files and data exchange between the computer and recorder. The installation dialog is performed in the language set on your computer.
Page 3
2. Click “Install ApneaLink. ” Follow the prompts from the installation software. Note: The „Install Acrobat Reader“ option is not displayed if the program has already been installed. 3. Connect ApneaLink directly to the USB connection of your PC when asked to.
Page 4
First Steps Starting the Program Double-click the ApneaLink icon on the desktop. Connecting the Recorder to the Computer The recorder must be connected to the computer as shown above in order to prepare and download the device. Preparing for Recording Click on “Prepare ApneaLink”...
Page 5
Viewing Recordings The index card box is used for the administration of patient data, recordings, and reports. Click this icon to open the report selected in the index card box. The report will show the recording results, including the risk indicator. Click this icon to open the recording selected in the index card box.
Page 6
For patent information, see www.resmed.com/ip ApneaLink is a trademark of ResMed R&D Germany GmbH and registered in U.S. Patent and Trademark Office. Adobe, the Adobe logo, and Acrobat Reader are registered trademarks or trademarks of Adobe System Incorporated in the U.S.A. or in other countries.
Page 7
228574/1 2012-04 APNEALINK Quick Setup Guide Global Global leaders in sleep and respiratory medicine www.resmed.de...
Need help?
Do you have a question about the ApneaLink Plus and is the answer not in the manual?
Questions and answers