Turning Off an Alarm or the
Hourly Time Signal
To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.
To have an alarm or hourly time signal
●
sound again, turn it back on.
Note
Indicators are displayed while any of
●
the alarms or the hourly time signal is
turned on.
The applicable indicators are not
●
displayed while all of the alarms are
turned off and/or the hourly time signal
is turned off.
Hourly time signal
Alarm
Snooze
Watch Operation Guide 3513
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Use (A) and (C) to scroll through the alarm
([AL-1] to [AL-4], [SNZ]) and hourly time
signal (
to turn off is displayed.
3.
Press (B) to turn off the displayed alarm or
the hourly time signal.
Each press of (B) toggles between on
●
and off.
Turning off all alarms causes
●
(alarm) to disappear from the display.
Turning off the hourly time signal
causes
disappear.
Note
If
●
you turn off an alarm, it means that at
least one of the other alarms is still
turned on. To turn off all of the alarms,
repeat steps 2 and 3 until the
(alarm) indicator is no longer
displayed.
) screens until the one you want
Alarm number or hourly time signal
(hourly time signal) to
(alarm) is still displayed after
Digital Compass
You can use the Compass Mode to
determine the direction of north, and to
check your bearing to a destination.
Important!
Check the information at the link below
●
to find out how to ensure correct
readings.
Calibrating Compass Readings
l
Digital Compass Reading
l
Precautions
14