Using The Timer; Other Settings; Enabling The Button Operation Tone - Casio 3513 Operation Manual

5.
Use (A) and (C) to change the minutes
setting.
6.
Press (E) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Setting a start time of "0H00'00" will
●
perform a countdown of 24 hours.

Using the Timer

1.
Enter the Timer Mode.
Navigating Between Modes
l
2.
Use the operations below to perform a
timer operation.
A
Start
(Countdown starts)
A
Pause
A
Resume
(Time up)
A beeper will sound for 10 seconds to
●
let you know when the end of a
countdown is reached.
You can reset a paused countdown to
●
its start time, by pressing (C).
3.
Press any button to stop the tone.
Watch Operation Guide 3513

Other Settings

This section explains other watch settings you
can configure.
Enabling the Button
Operation Tone
Use the procedure below to enable or disable
the tone that sounds when you press a button.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (E) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
3.
Press (D) nine times.
This causes [key♪] or [MUTE] to flash on
the display.
4.
Press (A) to select [key♪] or [MUTE].
[key♪]: Operation tone enabled.
[MUTE]: Operation tone disabled.
5.
Press (E) twice to complete the setting
operation.
[ ] is displayed while the operation
O
●
tone is muted.
Home City
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Note that alarm and timer tones will still
●
sound even while the operation tone is
muted.
30