Table of Contents
Advertisement
Frequently Asked Questions
Problem
The LED lighting on one
of the adjustable
shelves is not working.
The LED lighting is not
working on any of the
shelves.
100
Possible cause and solution
The shelf is not sitting correctly on the shelf sup-
ports.
Check that the shelf is positioned correctly on the
shelf supports. The shelf has metal contacts at the
front left corner which supply power to the LED
lighting.
Push in the shelf until it clicks into position.
The LED lighting on the stainless steel trim is faulty.
Replace the stainless steel trim with LED lighting.
A replacement is available from Miele Customer
Service.
Liquid has been spilt onto the LED lighting on one of
the shelves or into the contact openings on the left-
hand shelf supports.
The safety shut-off mechanism has switched off the
LED lighting on all the shelves.
Wipe the stainless steel trim with LED lighting with
a damp cloth and dry it or leave it outside the re-
frigeration appliance to dry.
Ensure that the contacts are clean and dry before
replacing the shelves with LED lighting.
Push in the shelf until it clicks into position.
Close the appliance door.
When the door is opened again, the interior lighting
will come on.
If this does not happen, there is a fault.
Contact Miele Customer Service.
Advertisement
Table of Contents
