Kit Contents - Xblitz GORIDE User Manual

Dear Customer,
Thank you for purchasing the Xblitz GoRide dashboard camera. The product you
have purchased is a video device designed to record any activity from the dashboard
of your vehicle and record the routes taken by your vehicle.
BEFORE USE
1. It's recommended to use branded 10 SD cards with a capacity between 8 and
64GB.
2. Before inserting the memory card in the recorder, it must first be formatted
to the FAT32 file system on the computer, and then in the recorder.
3. Only insert the memory card into the device when the device is turned o .
Inserting the memory card in the switched-on recorder may damage both the card
and the device. This also applies when removing the card from the device.
4. The built-in battery in the video recorder is primarily used to maintain the device
settings. Once disconnected from a power supply, the recorder will function for
no longer than 5 minutes.
5. When the memory card becomes full, the oldest, unprotected footage will
be overwritten by new video files.
6. The device functions should only be used for their intended purposes. Do not
activate the motion detection or parking mode functions while driving. This may
result in the device turning on or o automatically.
7. It is recommended that the sensitivity of the G-SENSOR function be set to the
lowest level to prevent the device from protecting any unnecessary recordings,
e.g. from driving on bumpy roads. Protected recordings will not be overwritten
when the memory card is full.
8. The device has a condenser microphone that records all ambient sounds. These
recorded sounds may overlap with one another causing them to be distorted.
9. ATTENTION! The HDMI port on the device is inactive.

KIT CONTENTS

1. Xblitz GoRide car camera
2. Suction cup mounting bracket
3. Car charger
4. USB cable
5. Micro SD card reader
12