Advertisement
Please read and understand setup guide prior to installing the Electric Actuator!
10. Secure the electric actuator to the pin using the provided lynch pin.
The electric actuator is now ready to be used with your ABI model Rascal.
Connecting the Wireless Control Unit (Optional) –
The effective range of the wireless unit is between 0-10' from the control unit. The wireless
unit may not function properly outside of this distance.
1. Remove the wireless control box with two key fobs from the packaging.
2. Remove the key fobs from the connecting cable of the wireless control box, and place off to the side.
3. Open the control box for the electric actuator and locate the white rectangular connector inside the box.
4. Connect the end of the wireless control box to the white rectangular connector. Make sure the tab and
slot on the connector line up properly before securing the two ends together.
5. Insert the fully connected unit back into the electric actuator control box and close the lid of the control
box back fully.
The wireless control option is now ready to be used.
ABI
-‐
8 55-‐211-‐0598
-‐
w ww.abiattachments.com
( Absolute
I nnovations,
I nc.)
Advertisement
