Advertisement
Please read and understand setup guide prior to installing the Electric Actuator!
Thank You,
On behalf of the ABI family we would like to thank you for your recent purchase of the ABI
Rascal Electric Actuator. Our Company's goal is to provide our Customers with innovative quality tools
and parts, along with first-rate customer care.
These instructions are designed to help you, the customer; get your Electric Actuator hooked up
to a tow vehicle, the Rascal, and into use. If there are any further questions after reading these
instructions, please feel free to call one of our friendly and knowledgeable Customer Service Staff. To
contact our Customer Service Department call 855-211-0598, M-F 8am-8pm EST.
Parts received:
1 – Control Box with support plate and built in 30 amp fuse
1 – Electric Actuator
1 – Double sided 4 prong extension cable
1 – Single sided 4 prong extension cable – cable splits out to a three prong connector and out to two bare
wire ends
1- Rocker switch with mountable swivel arm and bracket
1- Double sided 3-prong extension cable
1 – 1/4" U bolt with hardware and plate
2- Crimp style Ring Terminals
Tools needed for assembly:
Control Box and Wiring Harness:
½" Combination wrench
½" Socket with Wrench
Cable Ties or other means to secure wiring (optional)
Rocker Switch:
5/16" Socket with Wrench
Phillips head screw driver
7mm Socket and Wrench
Square Hand Jack Removal and Electric Actuator Installation:
¾" Combination wrench
¾" Socket with Wrench
ABI
( Absolute
I nnovations,
I nc.)
-‐
8 55-‐211-‐0598
-‐
w ww.abiattachments.com
Advertisement
