Download Print this page

abi ARENA RASCAL PRO Setup Manual page 10

Electric actuator

Advertisement

Please read and understand setup guide prior to installing the Electric Actuator!
 
Basic Troubleshooting Guide –
A clicking noise can be heard inside the control box, and the electric actuator will not raise or
lower. The 30 amp fuse inside the control box may have blown, or may have become damage. If this is
the case replace the fuse and ensure the electric actuator is working properly. If this does not resolve the
issue please contact the ABI Customer Support Staff for additional troubleshooting solutions.
The fuse inside the control box is not blown or damaged, and a clicking noise can still be heard
coming from the control box. The positive or ground wire on the ATV side wiring harness may not be
fully connected to the tow vehicle battery. Check to make sure the both wires are firmly connected to the
battery of the tow vehicle, and make sure the electric actuator is working properly. If this does not resolve
the issue please contact the ABI Customer Support Staff for additional troubleshooting solutions.
The actuator will raise/lower but will not lower/raise again. Contact the ABI Customer Service
Support Staff for troubleshooting solutions.
When I press the buttons on the wireless key fob nothing happens. Make sure that the red light is
lighting up on the top of the key fob when the button is pressed. If the red light is coming on the wireless
unit may be out of range. If the wireless unit is within 0-10' and nothing is happening then the battery in
the key fob may be low. Try using the second key fob and ensure the actuator works properly when the
button is pressed. If this resolves the issue, then the battery of the first key fob is low and will need to be
replaced. If the issue is not resolved by this means please contact the ABI Customer Support Staff for
additional troubleshooting solutions.
For additional questions or help with setting up the electric actuator,
please feel free to contact the ABI Customer Support Staff for additional help.
The ABI Customer Support Staff can be reached at by phone at:
855-211-0598 M-F, 8am-8pm EST.
ABI  
-­‐           8 55-­‐211-­‐0598           -­‐           w ww.abiattachments.com  
( Absolute   I nnovations,   I nc.)          

Advertisement

loading

Related Products for abi ARENA RASCAL PRO

This manual is also suitable for:

Gravel rascal pro