Technical Data - salmson Nexis x-care Installation And Starting Instructions

4. Application
This equipment is used to monitor and record
data related to NEXIS pump operations for every
kind of applications.

5. Technical data

5.1 X-care pump designation
Nexis V2207 - FGE / X / 400 - 50
X = X-care
5.2 Data table
Maximum operating pressure
Maximum pressure
Temperature range
Liquid temperature
Ambient temperature
Ambient humidity
Electrical data
Motor Protection index
Overvoltage category
Electromagnetic compatibility :
• residential emission
• industrial immunity
Operating voltages
Power consumption
Power cable section
5.3 Scope of supply
• Installation and operating instructions.
• G1/2 filling plug with o'ring (to be used in case of
pressure sensor replacement).
5.4 Accessories
Original accessories are available for X-care.
Designation
IR-dongle: Infra-red communication interface for PDA (SDIO slot)
Please contact your SALMSON sales office for accessories list.
POMPES SALMSON SAS 12/2012
16 or 25 bar depending on pump maximum pressure
-20 to +120 °C
-30 to +120 °C if full stainless steel
Storage: -20 to +40°C
Operation: -10 to +40°C
< 90% for 55°C
IP 55
II
EN 61000-6-3
EN 61000-6-2
1~ ; 100 / 240V ±10% ; 50 / 60Hz ±5%
< 4,2W
Conductor: 0,2 to 2,5mm stranded or rigid wires
2
Insulating diameter : 5 to 10mm
English
N° article
2088224
17