Table of Contents
Advertisement
Air flow control in the connector with a circular air throttling damper
1. Remove the grille from the connector.
2. Remove the excess inserts in the air throttling damper by using a knife to cut the jumpers holding them in place.
3. Place the air throttling damper into the spigot of the connector.
4. Install the ventilation grille back into the connector.
Circular air throttling damper 07125
60
50
40
30
20
10
0
46
inserts removed - 1
inserts removed - 2
inserts removed - 3
inserts removed - 4
inserts removed - 5
Air flow [m
/h]
3
ventilation-system.com
Advertisement
Table of Contents
