Table of Contents
Advertisement
METAL AIR DISTRIBUTION BOXES
1
PREPARATION FOR MOUNTING
If the air distribution box design enables changing location of the spigot, proceed as follows:
1. Unscrew the service panel and the spigot and disconnect
these from the air distribution box.
Reinstall the plugs (included in the delivery set) depending on the way of mounting of the air distribution box:
3. Remove the plugs from the surface, to which the flanges will
be connected.
ventilation-system.com
2. Change location of the spigot and the service
panel and fix them with screws to the casing of the air
distribution box.
4. Place the removed plugs on a surface that will not
be used for flange connection (see "Mounting of plugs").
11
Advertisement
Table of Contents
