Dometic 10 Series Installation Manual page 26

Installing the refrigerator-oven combination
4.6 Installing the ventilation grill
I
NOTE
Use exclusively original Dometic ventilation grills to ensure safe
operation.
No. in
fig. c, page 11
1
2
3
4
➤ Seal the installation frame to make the connection waterproof (fig. d, page 11).
➤ Insert the installation frame and screw it down tightly (fig. e, page 11). Use all
the fixing holes for this.
➤ Fit the ventilation grill (fig. f 1 – 2, page 12).
➤ Insert the slider and lock the ventilation grill with it (fig. f 3, page 12).
4.7 Installing condensation drain
I
NOTE
• Condensation can form inside the refrigerator due to frequent door
opening, incorrectly stored food or food that is stored when it is too
warm.
• Condensation must be drained with a constant slope.
Install the condensation drain as follows:
Variant 1
➤ Run the condensation hose from the refrigerator through an opening in the floor
which goes outside under the vehicle.
Variant 2
➤ Attach the condensation hose directly to the fitting intended for it on the
ventilation grill (fig. c 4, page 11).
26
Description
Slider
Ventilation grill
Installation frame
Fastening for condensation drain
RMDT10.5(X)T
EN