Part Ii: Pairing And Connecting The Ios Device; Via Bluetooth - Mackie PRODX8 Reference Manual

Part II: Pairing and Connecting the iOS Device

via Bluetooth

You should have to follow these
instructions only once for each device
paired via Bluetooth. After that they should
remain paired, although you will need to
connect manually to the ProDX. If already paired, follow
steps 6-7 to connect manually to the ProDX.
These are the steps necessary to pair the device
with the ProDX.
1. Start by turning both the device and the ProDX
on (if they're not already).
2. Tap the 'Settings' icon.
3. If the Bluetooth connection displays "Off"
(as seen below) we'll need to turn it on.
Tap anywhere on the Bluetooth line to open it.
4. From here, enable Bluetooth simply by swiping
right. [Tapping also enables / disables Bluetooth].
5. To enter pairing mode, press and hold
the BT / Line In button on the front panel
of the ProDX.
The button LED will illuminate and flash
white while in pairing mode. If it does not,
start the pairing process again, and make
sure that the ProDX and your device are both in pairing
mode at the same time.
6. As seen below, ProDX is listed as a device,
but is not connected. Since we're trying to connect
ProDX via Bluetooth, tap it.
7. From there, your device should indicate
that it is successfully paired and connected.
8. Now simply press the home button on the device to
return to the home screen, tap the MixerConnect icon
to open the app and let the good times roll!
Reference Guide
7