Phones; About - Mackie PRODX8 Reference Manual

System View continued...

23. Phones

With headphones connected to the phones jack
and the Phones tab selected, you are able to raise
and lower the headphone level.
Here, the phones slider controls the level being
sent to the headphones. Simply drag the Phones
Gain slider right to raise the level on the headphones
and left to lower it. The "Phones Gain" label will
display the phones value as the phones level is
adjusted. The phones level ranges from –∞ to +12 dB.
The phones jack is post-everything, so the signal that
is sent to the phones output is the same signal that's
sent to the main outputs. But with separate master
level controls you're able to cue intermission music
via phones before sending the signal to the main PA.
WARNING: The headphone amp is loud
and can cause permanent hearing damage.
Even intermediate levels may be painfully
loud with some headphones. BE CAREFUL! Always
turn the phones slider control all the way left before
connecting headphones or doing anything new that
may affect the headphone volume. Then turn it up
slowly as you listen carefully.

24. About

Once tapped, the About tab displays information
about the MixerConnect app version that is currently
installed on the device.
20
MixerConnect
23
24
Additionally, the following list describes all of the
goodies as shown in the image above:
Contact Support — So you need to talk to someone
and your psychiatrist doesn't know the first thing about
ProDX? We've got your back... tap here to contact Tech
Support using your device!
ProDX Support Docs and Videos — Several
resources – including additional support documentation
and videos – have been created for ProDX. Tap this link
to check them out!
ProDX Product Manual — Need instantaneous
information? Tap 'ProDX Product Manual' to open
and review the Owner's Manual...all on your device!
MixerConnect Manual — This link works the same
way as the aforementioned 'ProDX Product Manual'
link, but instead opens the MixerConnect Reference
Guide. In other words, what you're looking at...Right.
Now. Creepy. Let's move on.
< Welcome — Tap this button to return to the
opening MixerConnect app welcome screen where
you'll be able to mix, demo or connect from there (as
described on page 9).
Factory Reset — Since settings may be changed via
MixerConnect, it may be necessary to reset the ProDX
to its factory settings. This process is known around the
office as the "Vulcan Mind Meld".
Please keep in mind that this erases all settings,
including any levels, EQs, etc. that may have been
set. Be sure to power down any amps and/or powered
speakers before resetting ProDX.
Simply tap the 'Factory Reset' button or press and
hold the following buttons simultaneously for a few
seconds to reset the ProDX to its factory settings:
• Channel 1, Channel 2 and MAIN buttons.
You are also wiping the ProDX's memory
of previously paired devices. To remedy this,
on your smartphone, tablet or other Bluetooth
device, you will need to 'forget device' in the Bluetooth
settings, then re-pair in order to regain communication
and functionality.