Part Ii: Pairing And Connecting The Android; Device Via Bluetooth - Mackie PRODX8 Reference Manual

Part II: Pairing and Connecting the Android Device
via Bluetooth
You should have to follow these
instructions only once for each device
paired via Bluetooth. After that they
should remain paired, although you will
need to connect manually to the ProDX. If already
paired, follow steps 6-8 to connect manually to the
ProDX.
These are the steps necessary to pair the device with
the ProDX unit.
1. Start by turning both the device and the ProDX
on (if they're not already).
2. Tap the 'Tools' icon to open the device's settings.
3. Tap anywhere on the Bluetooth line to open it.
4. From here, enable Bluetooth simply by swiping
right. [Tapping also enables / disables Bluetooth].
5. To enter pairing mode, press and hold
the BT / Line In button on the front panel
of the ProDX.
The button LED will illuminate and fl ash
white while in pairing mode. If it does not,
start the pairing process again, and make
sure that ProDX and your device are both in pairing
mode at the same time.
6. As seen below, ProDX is listed as a device, but is
not connected.
ProDX8
7. Since we're trying to connect ProDX via Bluetooth,
tap it.
ProDX8
8. From there, your device should indicate
that it is successfully paired and connected.
ProDX8
9. Now simply return to the home screen on the
device, tap the MixerConnect icon to open the app
and let the good times roll OR go straight to the app
once connected!
ProDX8 Connected
ProDX8
Reference Guide
5