Siemens SIREMOBIL Iso-C Maintenance Instruction page 25

General Information
Technical safety checks, test certificate
of the check
5.2 Are the warning devices functioning
properly?
5.3. Do all system movements stop prop-
erly in their end positions?
5.4 Does the collision protection device
stop all system movements properly (e.g.,
collision protection)?
5.5. Are all safety distances (wall, floor,
ceiling) met or ensured by other appropri-
ate measures (such as light barriers)?
5.6. Are the other safety shutdown devices
functioning properly (e.g., safety floor
plate)?
5.7 Are the positions of the table and sys-
tem reproducible (e.g., zero positions, layer
height, etc.)?
Siemens AG
Medical Solutions
SPR2-230.101.02.06.02
07.05
Maintenance instructions for the
check/comments
3. Electrical safety, checks:
SIE Audible warning signal
SIE Radiation indicators
3. Mechanical safety, check:
SIM Lifting column
3. Electrical safety, check:
SIE 3D reconstruction
Check the collision protection, if it is
installed.
Otherwise: n.a.
Check the measures if they are installed:
Otherwise: n.a.
Check the measures if they are installed:
Otherwise: n.a.
n.a.
Page 25 of 46
CS PS 24
25
SIREMOBIL Iso-C