Advertisement
Step 30
å
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D14 and D15).
å
Fasten the EXTENSION SLIDES (35MC) to the DRAWER SIDES (D14 and D15). Use four
GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten the KNOB (187K) to the DRAWER FRONT MOLDING (K). Use one SILVER 1-1/2"
MACHINE SCREW (95S).
2
3
95S
SILVER 1-1/2" MACHINE SCREW
(1 used for the KNOB)
Open end
1
K
187K
GOLD 5/16" FLAT HEAD SCREW
(4 used for the SLIDES)
10A
D15
3S
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D14
2
3
Drawer Slide
Center the screw in the oval hole.
Open end
1
Page 35
Advertisement
