Related Manuals for Soozier A90-326V80
Summary of Contents for Soozier A90-326V80
- Page 1 INapb007_US A90-326V80 TREADMILL IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY UESR’S MANUAL...
-
Page 2: Caution During Use
1. CAUTION To avoid any hurts, please read this manual carefully before using. For safety purpose do not stand on running belt while start. Please stop immediately for any feeling of vomit、jerky during using. Please increase speed slowly if needed. ... -
Page 3: Technical Specification
the machine. Do not put any objects on the machine. Put away the plug from heated place or fire seat. Please switch off all functions and pull out plug after using. Please do not stand directly on the belt while starting the machine. ... - Page 4 1.2 “DISTANCE”window has two modes which shows the current movement distance. ①In the forward counting mode, the distance will be increased from 0.0 to 99.9 miles, it will recount if the distance reaches the top point. ②In the distance countdown mode, the distance will be decreased from the setting data(setting range:1.00~99.00miles) to 0 .
-
Page 5: Functional Instruction
(3) In running state: Pressing “start/stop” , then the treadmill will stop slowly and back to standby state. 2.2 “+”“-”button is to adjust speed. Keep pressing “+”/“-” over 0.5 seconds, the speed will keep increasing or decreasing. Note: The speed will change by 0.1mph. 2.3 “M”:①In standby mode: it can switch from different mode, including Time, Distance and Calories. - Page 6 (4) About the Remote Control 4.1 Pull out the insulating sheet, you can use the remote control directly. 4.2 The remote control can directly control the treadmill. 4.3 If you have purchased multiple treadmills, in order to prevent the treadmills from interfering with each other, please perform the following operations to match.
-
Page 7: Daily Maintainance
8. Runbelt Adjustment (1) Running belt deviate to left Start the machine by speed at 2-3mph/h without loading, use die nut to make the screw go 1/4 circle(see fig1). Then make the machine running without loading 1-2 minutes. Please adjust like this to make the belt till to mid place. -
Page 8: 10. Trouble Shooting
10. Trouble Shooting Error Meaning Problem Solution Code Control board is broken Control Board Error or pseudo soldering on Replace control board control board Control Board Error Control board is broken Replace control board 1. Open the motor cover and check whether the motor is blocked.
Need help?
Do you have a question about the A90-326V80 and is the answer not in the manual?
Questions and answers
Remote control is missing . Is there a code?