Omnitronic XMT-1400 MK2 User Manual page 20

20 Button PITCH
21 Button REPEAT
22 Button PROG
23 Press control FOLDER/
TRACK SEARCH
24
Button [EJECT]
25 Power button
26 AC power input
27 Line output, unbalanced
• Shortly press this button to select the pitch adjustment range: 4 %,
8 %, 12% and 16%.
• Keep this button pressed for 5 seconds to activate/deactivate the
pitch slide control. With the control activated, the button LED will light
up red and the display indicates "PITCH".
For selecting the repeat functions:
• First actuation of the button (indication "REP 1"): continuous repeat
of the title selected
• Second actuation of the button (indication "REP ALL"): continuous
repeat of all titles
For programming an individual title sequence.
• Turn the control to browse the titles. Title number and title name are
indicated in the display. Then press the control to select the desired
title.
• For selecting folders, first press the control. The folder name is
indicated in the display. Then turn the control to browse the folders.
Press the control to select the desired folder.
Ejects and retracts the CD. While playing a CD, the drive is locked
against unintentional opening.
Press this button to turn the unit on and off.
Plug in the supplied power cable here. The device is equipped with a
switching power supply, which allows mains voltage between 100 and
240 volts and thus worldwide use.
Analog audio output (RCA left/right) with line level for connecting an
amplifier, a mixer or other units with line level inputs.
20 • EN