Omnitronic XMT-1400 MK2 User Manual page 19

No. Element
Selector switch CD/USB/SD
1
2 Display
3 Buttons 0 to 9
4 USB port
5 Memory card slot
6 Button TIME
7 Button SGL/CTN
8 Button JOG MODE
9 Button BPM-TAP
10 Button REVERSE
11 Buttons SEARCH
12 Jog dial
13 Button CUE
14 Button
15 CD slot
16 Buttons PITCH BEND + and –
17 Pitch slide control
18 Button BRAKE
19 Buttons IN, OUT, RELOOP
Function
In pause mode, short actuation of the button allows switching between
the input sources CD, USB, and SD. The LEDs will verify which source
is selected.
Indicates all functions of the unit and information of the data carrier.
The display icons will be explained in section DISPLAY.
Numerical keys for direct selection of a title.
USB port (type A) for connecting a USB storage device.
Slot for inserting SD and SDHC cards.
• Audio CD: Switches the time indication between elapsed, remaining
title and total remaining time
• MP3: Switches the time indication between elapsed and remaining
title time
Engages single title playback mode (the unit will play one title and
stop). Otherwise, all titles of the CD or the selected folder will be
played.
Determine the operating mode of the jog dial. The LED next to the
button indicates which mode is selected:
• Basic setting (LED off): Pitch Bend
• First actuation of the button (LED lights): fast forward and reverse
• Second actuation of the button (LED flashes): scratch mode
To determine the beats per minute (BPM) for the current tile. Tap the
buttons to the beat of the music until the value is indicated in the
display.
To switch to reverse play. With the function activated, the button will
light up.
and Buttons for fast forward ( ) and reverse ( ) within a title.
• In play mode for the function pitch bend
• In pause mode for precisely selecting a certain spot
• For fast forward and reverse within a title when the function has been
activated with the button JOG MODE
• For generating scratch effects when the function has been activated
with the button JOG MODE
• As default setting pressing CUE will cause the player to enter pause
mode at the starting point (time index 0:00:00) of the title (LED lights
red).
• When keeping the button pressed in pause mode, the title is
momentarily played. As soon as you release the button the unit
instantly returns to the cue point.
• Every time a new cue point is set, the LED flashes repeatedly.
Switches between play and pause. During playback the button lights
blue, in pause mode it flashes.
For entering CDs.
The function Pitch Bend creates a temporary change of speed. As long
as the buttons are pressed, the title is played slower or faster.
Sets the playback speed up to ±16 %. Slide it up to decrease the pitch,
slide it down to increase the pitch. The pitch percentage is indicated in
the display.
For selecting the brake effect for the start/pause function. With the
function activated, the button will light up.
Buttons to memorize and play a seamless continuous loop.
• IN: Sets the starting point of a loop (LED lights red).
• OUT: Defines the end point of a continuous loop which is instantly
started (LEDs IN and OUT are flashing). The loop will continue to
play until the button OUT is pressed once again.
• RELOOP: Starts the loop once again.
19 • EN