ASROCK Z790 Series Setup Manual page 68

enable the onboard HD and automatically disable it when a sound card is installed.
Configuration options: [Auto] [Enabled] [Disabled]
Front Panel
Allows you to select Front Panel type.
[HD] sets the front panel audio connector mode to high definition audio.
[AC 97] sets the front panel audio connector mode to legacy AC'97.]
Onboard HDMI HD Audio
Allows you to enable or disable audio for the onboard digital outputs.
This item appears when you've installed a graphics card on your motherboard.
Configuration options: [Enabled] [Disabled].
Onboard WAN Device
Allows you to enable or disable the onboard WAN device.
Configuration options: [Enabled] [Disabled].
Deep Sleep
Allows you to configure deep sleep mode for power saving when the computer is shut
down. We recommend disabling Deep Sleep for better system compatibility and stability.
Configuration options: [Enabled] [Enabled in S5] [Enabled in S4-S5]
Restore on AC/Power Loss
Allows you to select the power state after a power failure.
[Power Off] sets the power to remain off when the power recovers.
[Power On] sets the system to start to boot up when the power recovers.
Turn On Onboard LED in S5
Allows you to turn on or off the Onboard LED in the ACPI S5 state.
Configuration options: [Enabled] [Disabled]
Restore Onboard LED Default
Allows you to restore Onboard LED default value.
Configuration options: [Disabled] [Apply]
64