ASROCK Z790 Series Setup Manual page 58

VF Offset Mode
Selects between Legacy and Selection modes. Need Reset System after enabling Over-
Clocking Feature to Initialize the default value. In Legacy Mode, setting a global offset for
the entire VF curve. In Selection modes, setting a selected VF point.
Configuration options: [Legacy] [Selection]
Ring Voltage Offset
Specifies the Offset Voltage applied to the Ring domain. This voltage is specified in mil-
livolts.
GT Voltage Mode
Selects between adaptive and Override Voltage modes. In Override Mode the voltage
selected will be applied overall operating frequencies. In Adaptive Mode the voltage is
interpolated only in turbo mode. This item appears when you use the onboard graphics.
Configuration options: [Adaptive] [Override]
Extra Turbo Voltage
Specifies the extra turbo voltage applied while the GT is operating in turbo mode. Unit is
in millivolts.
GT Voltage Offset
Specifies the Offset Voltage applied to the GT domain. This voltage is specified in mil-
livolts. This item appears when you use the onboard graphics.
System Agent Voltage Mode
Selects between Adaptive and Override Voltage modes. In Override Mode the voltage
selected will be applied overall operating frequencies. In Adaptive Mode the voltage is
interpolated only in turbo mode.
Configuration options: [Adaptive] [Override]
Extra Turbo Voltage
Specifies the extra turbo voltage applied while the SA Uncore is operating in turbo mode.
Unit is in millivolts.
System Agent Voltage Offset
Specifies the Offset Voltage applied to the Uncore domain. This voltage is specified in mil-
livolts.
54