ASROCK Z790 Series Setup Manual page 41

Intel Z790/H770/B760 Series
Row Precharge (tRP)
The number of clock cycles required between the issuing of the precharge command and
opening the next row.
RAS# Active Time (tRAS)
The number of clock cycles required between a bank active command and issuing the
precharge command.
Command Rate (CR)
The delay between when a memory chip is selected and when the first active command
can be issued.
Secondary Timing
Write Recovery Time (tWR)
The amount of delay that must elapse after the completion of a valid write operation,
before an active bank can be precharged.
Refresh Cycle Time 2 (tRFC2)
The number of clocks from a Refresh command until the first Activate command to the
same rank.
Refresh Cycle Time per Bank (tRFCpb)
The number of clocks from a Refresh command (per bank) until the first Activate
command to the same rank.
RAS to RAS Delay (tRRD_L)
The number of clocks between two rows activated in different banks of the same rank.
RAS to RAS Delay (tRRD_S)
The number of clocks between two rows activated in different banks of the same rank.
Write to Read Delay (tWTR_L)
The number of clocks between the last valid write operation and the next read command
to the same internal bank.
Write to Read Delay (tWTR_S)
The number of clocks between the last valid write operation and the next read command
to the same internal bank.
37