Changing The Speaker's Gender; Understanding Talkman Commands - Honeywell Vocollect Talkman A700 Product Manual

26 | Vocollect Talkman A700 Product Guide
The device says "faster" each time you press the + button and "slower" each time you press the — button.
If the speed of the voice is at the fastest possible setting, the device says "This is fastest." If the speed of
the voice is at the slowest possible setting, it says "This is slowest."
Note: You can exit this menu without changing the settings by pressing the Play/Pause button before
you press the Operator button.
5. When the voice is speaking as quickly or as slowly as you want, press the Operator button to save the
new speed setting.

Changing the Speaker's Gender

Make sure the device is on or sleeping. The LED indicator should be either solid green or blinking green
(A500, T5-series and T2-series), solid green (T1), or have a solid green ring segment or a rotating green ring
(A700).
1. Press the Operator button.
The device says "Current operator is operator name. Select menu item."
2. Press the + or — button until it says, "Change speaker."
3. Press the Operator button.
If you use the + button to scroll through the options, Change Speaker is the sixth menu item in the list.
4. Press the + or — button to hear the next speaker.
The device says, "This is female" when it toggles to the female voice, or "This is male" to indicate the male
voice.
Note: You can exit this menu without changing the settings by pressing the Play/Pause button before
you press the Operator button.
5. When you hear the speaker you want to use, press the Operator button to select that speaker.

Understanding Talkman Commands

The Talkman device prompts the operator for responses that are specific to the voice-directed work he or
she is performing. Several basic Talkman commands, however, can be spoken by the operator at almost any
time while using the device.
You want to...
hear the current prompt again
put the device in sleep mode
wake up the device
erase the previous response so you can respond to the same prompt
again (VoiceClient only)
check the remaining charge on a Talkman A700 battery
(VoiceCatalyst 2.0 and newer only)
hear instructions for your response to the current prompt
hear a list of vocabulary words that you can say at the current prompt
indicate a problem and send a snapshot of the log file to
VoiceConsole (VoiceCatalyst 1.2 and newer only)
Confidential: For informational use by Honeywell resellers and customers only
Spoken Command
"Say again"
"Talkman sleep"
"Talkman wake up"
"Talkman backup"
"Talkman battery status"
"Talkman help"
"Talkman help"
"Talkman report problem"