Loading An Operator's Templates - Honeywell Vocollect Talkman A700 Product Manual

Blink Pattern
Fast blink
Blink
On (for one second then off)
Slow pulse
Bluetooth Indicator
Blink Pattern
Off
On
Fast blink
Pulse
Discoverable Blink Pattern
Slow Pulse
Network Indicator
Network Indicator
On
Fast Blink
Pulse

Loading an Operator's Templates

You need a device with a charged battery, headset, and any other equipment (belt, bar code reader) you are
going to use. You must be within radio range. Make sure the device is on or sleeping. The LED indicator
NFC State
The device is scanning for a tag.
TouchConfig sender or receiver mode entered
The device successfully read a tag.
Readable - act as a tag
Bluetooth State
Bluetooth radio is disabled.
Device is searching for other Bluetooth devices.
Device is attempting to connect to another Bluetooth
device.
Bluetooth is connected to a peripheral.
Device Bluetooth is discoverable by other devices.
Bluetooth is on and enabled, but is not connected,
not in discovery or paging mode, and not
discoverable.
Network State
Radio enabled but unconfigured
Radio enabled and connecting to
network
Connected to network
Confidential: For informational use by Honeywell resellers and customers only
Using the Talkman A700 Device | 23
What is Happening When This Occurs
The radio is No network is
powered on but the defined for the
device is not device.
attempting to
connect to the
network.
The radio is On first connection,
powered on and is on re-association
scanning, and after every
associating, and roaming out of
authenticating. network.
Full network The device may be
connection. requesting and
receiving an IP
address.