Controls And Features; Auger/Post Hole Digger - Champion 90034 Owner's Manual And Operating Instructions

Controls and Features

Read this owner's manual before operating your Auger/Post Hole Digger. Familiarize yourself
with the location and function of the controls and features. Save this manual for future reference.

Auger/Post Hole Digger

(1) Trigger – The trigger is used to start,
stop, and reverse the Auger bit.
(2) Emergency Stop Button –
Emergency engine stop button.
(3) Auger Handle – Tilt control for Auger
bit.
(4) Hydraulic Motor – Spins Auger bit.
(5) Control Valve – Directs the hydraulic
oil to the hydraulic motor.
(6) Work port Hydraulic hoses – These
hoses carry the hydraulic oil from the
control valve to the hydraulic motor.
(7) Pivot bolt – Adjust pivot bolt to rotate
the Auger bit and handle when drilling on a
slope.
Rev 90034-20090416
Controls and Features
(8) Hydraulic Oil Breather Cap –
Remove cap to fill hydraulic tank with oil.
(9) Engine – 270cc Gasoline driven
engine.
(10) 2" Ball Coupler – Attaches the Auger
to your vehicle.
(11) Engine Pivot – Allows engine to
swing freely when operating Auger.
(12) Hydraulic tank
(13) Hydraulic filter
(14) Strainer
(15) Hydraulic Pump
(16) Auger Bit
5