Troubleshooting - Champion 90034 Owner's Manual And Operating Instructions

Gasoline powered hydraulic auger
Table of Contents

Advertisement

Troubleshooting

Problem
Engine will not start
Engine will not start;
Engine starts but runs roughly
Engine shuts down during operation
Engine cannot supply enough power
or overheating
Engine gallops
Rev 90034-20090416
Cause
No fuel
Faulty spark plug
Unit loaded during start up
Low oil level
Choke in the wrong position.
Spark plug wire loose
Out of fuel
Low oil level
Insufficient ventilation
Engine governor defective
Specifications
Solution
Add fuel
Replace spark plug
Remove load from unit
Fill crankcase to the proper level
Make sure Auger/Post Hole Digger is
on a flat, level surface
Adjust choke.
Attach wire to spark plug
Fill fuel tank
Fill crankcase to the proper level.
Make sure Auger/Post Hole Digger is
on a flat, level surface
Check for air restriction. Move to a
well ventilated area
Contact the help line
23

Advertisement

Table of Contents
loading

Table of Contents