Table of Contents
Advertisement
Cleaning
CAUTION
DO NOT spray engine with water.
Water can contaminate the fuel system.
Use a damp cloth to clean exterior surfaces
of the engine.
Use a soft bristle brush to remove dirt and
oil.
Use an air compressor (25 PSI) to clear dirt
and debris from the engine.
Maintenance Schedule
Follow the service intervals indicated in the
schedule below.
Service your Auger/Post Hole Digger more
frequently when operating in adverse
conditions.
Contact our help line at 1-877-338-0999 to
locate the nearest Champion Power
Equipment certified service dealer for your
Auger/Post Hole Digger or engine
maintenance needs.
Every 8 hours or daily
Check oil level
Clean around air intake and muffler
First 5 Hours
Change oil
Every 50 hours or every season
Clean air filter
Change oil if operating in hot environments
Every 100 hours or every season
Change oil
Clean/Adjust spark plug
Check/Adjust valve clearance *
Clean spark arrester
Clean fuel tank and filter *
Every 3 years
Replace fuel line
*
To be performed by knowledgeable,
experienced owners or Champion Power
Equipment certified service dealers
Rev 90034-20090416
Maintenance
Auger/Post Hole Digger
Maintenance
Make certain that the Auger/Post Hole
Digger is kept clean and stored properly.
DO NOT expose the unit to extreme
conditions, excessive dust, dirt, moisture or
corrosive vapors.
CAUTION
DO NOT use a garden hose to clean the
Auger/Post Hole Digger.
Water can enter the engine through the cooling
slots and damage the engine windings.
Use a damp cloth to clean exterior surfaces
of the Auger.
Use a soft bristle brush to remove dirt and
oil.
Use an air compressor (25 PSI) to clear dirt
and debris from the Auger.
Inspect all air vents and cooling slots to
ensure that they are clean and unobstructed.
13
Advertisement
Table of Contents
