Start-Up
Fig A.
Fig B.
1. Locate the Wine Guardian remote interface
controller (Fig B.) within the wine cellar or
proceed to the Wine Guardian Local Interface
Controller main control panel. (Fig. A)
2. Press the up arrow to ensure the controller is
active. Then press the Settings button and hold
it down for five (5) seconds. The screen will
advance to the set up menu and "1 F" will
appear on the screen. (see pictorial on page 23).
For 50Hz models, default will be "1 C".
3. Continue to press the Settings button to
advance to Setting 6 on the setup screen "6 0"
(see page 23)
4. Press the up arrow to advance this setting to
either "2" for Freestanding Humidifier or "1" for
Integrated Humidifier (mounted at Wine
Guardian Unit. (see page 23)
5. Controller setup is complete.
23