Line-In + Line-Out - Yellowtec iXm Briefing Book

NOTE: When you insert the 3.5 mm jack, the iXm will record
the line input and switch off the mic input.
NOTE: The iXm's integrated LEA Engine is not active when
you record via line-in. You can adjust the line-in levels within
the iXm Admin Software.
How do I transfer data from my
You can simply use the provided USB cable to transfer data to your PC.
You can also use your HQ/SD card to transfer data to your computer. To
do so you need a SD card reader. Standard format of the SD card will be
FAT 32.
NOTE: Never remove your SD memory while recording,
playing back or while connected to a PC.
Can I use H/P-out as
Yes. You can use your H/P output as a line output. You can transfer your
recordings via cable while playing back your file.
The output of your iXm is capable of being switched to different output
formats. By default, it is set to headphone out. In this mode the output
is single ended L and R. The signal will be mono. You can change the
output to be a balanced or unbalanced line output.
These modes can be changed in the iXm User Software or iXm Admin
Software or simply by selecting a predefined setup. If you switch the
output from H/P to line out, the voice messages will be suppressed.
How do I level my
You don't have to! Benefit from the iXm's unique feature: The
powerful LEA DSP Engine (Level Energy Arbitration) always provides an
automatically balanced level of your recording.
NOTE: This option can also be turned off. In the iXm User
Software and iXm Admin Software you will find a variety of
settings to set levels individually.
line-out?
recordings?
Line-Out
iXm?
47