Playback - Yellowtec iXm Briefing Book

Playback

How do I playback a
Connect your headphones to the green H/P output on the iXm's port
panel.
NOTE: You can only playback files when you are in REC ready
mode. You cannot playback a recorded file while you are
recording.
Press the PLAY button on the playback keypad in order to playback
your recording. Depending on your settings, the playback will start at
the beginning of your last recording, or at the point where you stopped
your last playback.
NOTE: Both options can be setup in your iXm Admin
Software (see chapter "Software").
Do I need special
No, you can basically use any headphone with a 3,5 mm jack and an
impedance of >32 Ω.
NOTE: It is strongly recommended to check your volume
level before using the headphones in order to prevent
hearing damage (see: "How do I adjust playback volume?").
How do I adjust my
It is recommended to use headphones with adjustable volume control.
Anyway, while playing back a recording you can adjust headphone
levels directly on the iXm. If you need to control volume via the iXm
keypads, press and hold the STOP key on the record keypad and the
FFW or REW button on the playback keypad simultaneously in order to
increase or decrease the volume by 1dB per second.
When you hold the FFW/REW key, the volume will vary by 1dB per
second.
40
recording?
headphones?
headphone levels?