Adc Interface - Fibocom NL668-LA Series Hardware Manual

The other level
translator
dotted line please refer to solid line part, but pay attention to signal connection direction.
Note:
Level translate circuits is not suitable for applications of baud rates above 460Kbps.

5.6 ADC Interface

NL668-LA series module support two channels ADC interface. Use AT+MMAD command can read the
value of ADC interface. The voltage range of ADC interface is 0.3V to VBAT_BB.
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
FIBOCOM NL668-LA Series Hardware Guide
Figure 5-12 UART level translate reference 1
circuit is shown as Figure 5-13, The rest input and output circuit design of
Figure 5-13 UART level translate reference 2
Page 36 of 61