Conclusion - HID Lumidigm M Series Mechanical Integration Manual

Lumidigm M-Series M3xx Modules Mechanical Integration Guide, PLT-02217, Rev. A.0
This not only helps make sure the interior platen temperature is warmer than the enclosure
air mass, but it also addresses the human comfort issues mentioned in the earlier discussion
on temperature control. If this dual heating approach is used, the air mass set point can be
reduced to 5°C and the platen set to 10°C.
If the enclosure design approach uses a vent or is vented into a larger air mass such as a
building interior, the desiccant will be rendered ineffective and a different control strategy
would be required.

5 Conclusion

A successful mechanical integration of the M3xx module will take into consideration the
user experience, the mechanical constraints, and the intended deployment environment.
We hope that this paper provided information that assists and expedites development. If
there are any problems or questions, please feel free to contact Lumidigm and we will be
happy to work with you on your design.
Page 27 of 28 December 2014