Connectivity - HID Lumidigm M Series Mechanical Integration Manual

3.4.1

Connectivity

Detail for M30x ECU connectivity is provided in Figure 12 and in the chart, both below:
Figure 12: M30x ECU connector positions J3, J4, and J7
Connector Position J3
GPIO
Mating Hirose connector housing p/n is DF13-7S-1.25C with 26-30AWG crimp
terminal p/n DF13-2630SCF.
J3-1 = GND
J3-2 = N/C
J3-3 = N/C
J3-4 = Program Flag 10
J3-5 = Program Flag 11
J3-6 = Program Flag 12
J3-7 = Program Flag 13
Connector Position J4
USB connection. Five pin header.
Mating Hirose connector housing p/n is DF13-5S-1.25C with 26-28AWG crimp
terminal p/n DF13-2630SCF.
J4-1 = 5VDC
J4-2 = Data Minus (differential signal)
J4-3 = Data Plus (differential signal)
J4-4 = Ground (only if J7-4 is unused)
J4-5 = Shield
Page 15 of 28
Lumidigm M-Series M3xx Modules Mechanical Integration Guide, PLT-02217, Rev. A.0
December 2014