Program 3: Select The Conductivity Mode; Program 4: Select Resistivity Mode; Program 5: Select The Tds Mode - Fisher Scientific Accumet Basic AB30 User Manual

5.1.4

Program 3: Select the conductivity mode

Press enter to accept this choice of measuring conductivity and
return to the measure screen or press setup again to go to the
next page.
µS
5.1.5

Program 4: Select resistivity mode

Press enter to accept this choice of measuring resistivity and
return to the measure screen or press setup again to go to the
next page.
Ωohm
5.1.6

Program 5: Select the TDS mode

Press enter to accept this choice of measuring TDS and return to
measure screen or press setup again to go to next page.
TDS