Using Setup From The Measure Screen - Fisher Scientific Accumet Basic AB30 User Manual

5.1.1

Using setup from the measure screen

If you are currently viewing the Setup screen, setup is in essence
a scroll button which allows you to access, view, and change a
variety of operating parameters. While in setup, you may:
Press std to exit from setup to measure screen
std
without making change.
Press setup to scroll to the next parameter to
setup
view or change.
Press π to set values within each setup option.
p
Press enter to accept the displayed parameter.
The meter will then return to the measurement
enter
mode.
Press stdby to return to the stdby mode without
making a change. Pressing stdby again will
stdby
place the meter in the Measure mode.