Download
Share
Print this page
STAMOS S-CUTTER 50 UK User Manual
  1. Manuals
  2. Brands
  3. STAMOS Manuals
  4. Welding System
  5. S-CUTTER 50 UK
  6. User manual

STAMOS S-CUTTER 50 UK User Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
USER MANUAL
S-CUTTER 50 UK

Advertisement

loading
Need help?

Need help?

Do you have a question about the S-CUTTER 50 UK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for STAMOS S-CUTTER 50 UK

Summary of Contents for STAMOS S-CUTTER 50 UK

  • Page 1 USER MANUAL S-CUTTER 50 UK...
  • Page 2 SAVE THIS MANUAL • Do not abuse the Power Cord. Never use the Power Cord to carry the tool or Keep this manual for the safety warnings and precautions, assembly, operating, pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, inspection, maintenance and cleaning procedures.
  • Page 3 • Check for misalignment or binding of moving parts, breakage of parts, and any Prevent accidental fires. Remove any combustible material from the work area. other condition that may affect the tool’s operation. If damaged, have the tool a. When possible, move the work to a location well away from combustible; serviced before using.
  • Page 4 Avoid overexposure to fumes and gases. Always keep your head out of the fumes. Do not breathe the fumes. Use enough ventilation or exhaust, or both, to keep On/off switch fumes and gases from your breathing zone and general area. •...
  • Page 5 S-CUTTER 50 UK connection scheme: Manometer Air pressure adjustment knob Grounding cable connection Ports for plasma torch: The high energy density of the plasma arc enables a high 1 – plasma torch cutting speed with a warp-free cut quality. No special gas is 2 –...
  • Page 6 If the machine is operated without adequate cooling, the length of the duty cycle will be reduced greatly. C. Cable connections ACCESSORIES S-CUTTER 50 UK: Each unit is equipped with a main power cable, which is responsible for providing 1. Plasma torch PT-31 - 5m.

  • Page 7: Maintenance

    D. Torch connection 2. Weekly activities Connect the torch to the inverter by connecting the air tube that is attached at the Verify the proper operation of the air flow. Blow off or suck in dust or dirt from the end of the torch to the torch connector on the front part of the machine.
  • Page 8 NOTES NOTES Rev. 05.03.2021 Rev. 05.03.2021...
  • Page 9 Umwelt- und Entsorgungshinweise Hersteller an Verbraucher Sehr geehrte Damen und Herren, gebrauchte Elektro- und Elektronikgeräte dürfen gemäß europäischer Vorgaben [1] nicht zum unsortierten Siedlungsabfall gege- ben werden, sondern müssen getrennt erfasst werden. Das Symbol der Abfalltonne auf Rädern weist auf die Notwendigkeit der getrennten Sammlung hin.