STAMOS S-MULTI 525H UK User Manual
  1. Manuals
  2. Brands
  3. STAMOS Manuals
  4. Welding System
  5. S-MULTI 525H UK
  6. User manual

STAMOS S-MULTI 525H UK User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL
S-MULTI 525H UK

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S-MULTI 525H UK and is the answer not in the manual?

Questions and answers

Related Manuals for STAMOS S-MULTI 525H UK

Summary of Contents for STAMOS S-MULTI 525H UK

  • Page 1 USER MANUAL S-MULTI 525H UK...

  • Page 2: Safety Warnings And Precautions

    Work Area Precautions SAVE THIS MANUAL Keep your work area clean and well lit. Cluttered benches and dark areas Keep this manual for the safety warnings and precautions, assembly, operating, inspection, invite accidents. maintenance and cleaning procedures. Write the product’s serial number in Do not operate power tools in explosive atmospheres, such as in the the back of the manual near the assembly diagram (or month and year of purchase if presence of flammable liquids, gases, or dust.

  • Page 3: Specific Safety Rules

    Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Service Keep your hair, clothing, and gloves away from moving parts. Loose clothes, Tool service must be performed only by qualified repair personnel. Service or jewelry, or long hair can be caught in moving parts. maintenance performed by unqualified personnel could result in a risk of injury.
  • Page 4 b. Remove or make safe all combustible materials for a radius of 35 feet 11. Read and understand all instructions and safety precautions as outlined (10 meters) around the work area. Use a fire resistant material to cover or in the manufacturer’s Manual for the material you will weld or cut. block all open doorways, windows, cracks, and other openings.

  • Page 5: Heat Protection

    This liquid is lighter than liquid steel and is washed onto the weld. This enables a slow Duty Cycle cooling process and thus lower shrinkage stress. The anode (positive pole) is heated The duty cycle is the percentage of the operating time (measured in minutes) of a by electron bombardment and positive metal ions flow from there to the workpiece.
  • Page 6 HF IGNITION = A non-contact high frequency ignition used in TIG welding, which ensures a cleaner weld starting point POST TIME = gas flow variable at second intervals. This regulation is important for the cooling of the melted weld metal after the welding process and to protect against oxidation..

  • Page 7: Machine View

    The selection of the current, polarity and protective gas depends on the base material. This machine works with a TIG torch, which is equipped Power indicator = When someone turns the machine on, this indicator with a tungsten electrode and uses the additional protection of argon gas.

  • Page 8: Technical Details

    Technical details Accessories S-MULTI 525H UK Network frequency (Hz) Ignition HF: high frequency Contact Contact Open circuit voltage (V) Input current (A) Welding current (A) 10 - 180 10 - 180 10 - 50 Compressor connection (Bar)) Gas flow (L/min.)
  • Page 9 Note INITIATING OPERATION Bei einigen Pistolen, die keine umschaltbaren Elektroden haben, ist es notwendig die A. Unpacking Elektrode noch zusätzlich, durch das Anwenden einer Kneifzange festzuziehen um somit eine verlässliche elektrische Verbindung zu gewährleisten. Unpack all the items out of the box and make sure that you have received all items listed on the packing list.

  • Page 10: Working Procedures

    F. TIG cutting torch Manual welding with electrode • Connect the MMA hose to the minus pole (-). • Set the current control to the appropriate welding current (pulse current control to minimum position). Use the empirical formula: I = 40d, d is the diameter of the electrode.
  • Page 11 Umwelt- und Entsorgungshinweise Hersteller an Verbraucher Sehr geehrte Damen und Herren, gebrauchte Elektro- und Elektronikgeräte dürfen gemäß europäischer Vorgaben [1] nicht zum unsortierten Siedlungsabfall gegeben werden, sondern müssen getrennt erfasst werden. Das Symbol der Abfalltonne auf Rädern weist auf die Notwendigkeit der getrennten Sammlung hin.

Table of Contents