Settings - D-Link DNH-100 User Manual

Nuclias Connect Software User Manual
Nuclias
The Settings page displays General, Connection, SMTP, Backup, Firmware Upgrade, System Operation and Single-Sign-On (SSO)
information. The General tab displays customizable system settings, which includes adding a logo and enabling the captcha
feature. Device time and date and live packet interval settings are also available.
In the Customized Setting section, the following parameters can be configured:
In the Lan Settings section, the device connection parameters can be configured. These settings allow the management
computer to connect to the device.
Parameter
Get Address From
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
In the Date and Time section, parameters about the device time and date can be configured. It is recommended that an NTP
server is used; log and schedule settings are depanding on correct time and date configurations.
Parameter
Time Zone
NTP
NTP Server 1
NTP Server 2
Copy Your
Computer's Time
System
Parameter
Device Name Enter a description to set the device name.
Logo Click Browser to select a file to be used as the interface
logo. A local file can be selected by using the browse
function or by dragging and dropping a file into the
frame. Supported file types include PNG or JPG images.
Login Captcha
Click the drop-down menu to enable or disable the
login Captcha function.
Description
Click the drop-down menu to choose whether the
DNH-100 will get an IP address from a DHCP server
or to manually set a static IP address. By default it
is set to Static IP Address. Note: DHCP server is not
recommended.
If the above is set to Static IP address, specify an IP
address for the DNH-100.
Specify a subnet mask for the device.
Specify a gateway mask for the device. (Optional)
Specify a primary DNS for the device. (Optional)
Specify a secondary DNS for the device. (Optional)
Description
Click the drop-down menu to select the time zone.
Check to enable use of NTP server(s) to manage
device's date and time.
Specify the NTP Server's address.
Specify the secondary NTP Server's address.
Click to copy your management computer's time to
use here or manually set the time in the text boxes to
the left of this button.

Settings

Description
Page 55
Nuclias Connect Configuration
General