D-Link DNH-100 User Manual page 77

Nuclias Connect Software User Manual Appendix
Nuclias Connect App
Standalone Access Point
Discover DAPs
The Discover DAP function allows you to discover any access points in a L2/L3 wireless network.
From this page, you can discover standalone DAPs connected to the L2/L3 wireless network.
Tap to enable discovery on the L2 network.
Tap to enable discovery on the L2 network. Then enter an IP range in the provided From and To fields. Tap add ( ) to create a
new IP range entry. Tap remove ( ) to delete any defined range entries.
Once the range is defined, tap Next to initiate the discovery process.
Alternatively, tap Configure Access Point Profiles from the bottom of the page to add or delete any local profiles. See Configure
Access Point Profiles.
After the scanning the network range, the Step 3 page will list any detected access points.
Tap the radio button next to the DAP to select it. The selected local provision file will be pushed to the selected DAP.
Tap Push Provision File to continue.
Page 77