D-Link DNH-100 User Manual page 62

Nuclias Connect Software User Manual Nuclias Connect Configuration
Nuclias System Settings System Operation
The System Operation tab allows you the option to reboot, restore to factory default settings, or format the MicroSD card in
the DNH-100.
Click to Reboot the DNH-100 immediately.
to restore the DNH-100 to factory default settings. If Except IP address is checked, then the device IP address
Click
will remain the same.
Click to format the MicroSD card. Please be aware that you will lose all information on the MicroSD card once you
proceed.
Page 62