Ssl Certificate - D-Link DNH-100 User Manual

Nuclias Connect Software User Manual
Nuclias
The SSL Certificate function provides the means to install an SSL certificate for use on the network. To accomplish this task an
intermediate certificate is required. The intermediate certificate is used to establish the trust of the SSL certificate by binding it
to the Certificate Authority's root certificate. To complete the certificate trust configuration, the SSL Certificate function requires
the certificate file to be uploaded. Please reboot your APs after you uploaded certificate.
In the Update SSL certificate section, the following parameters can be configured:
Block
Upload Certificate From
File
Upload Key From File
Click Upload to initiate the file upload. The upload status and result will appear in the below area.
Configuration
Description
Click Browser... to select the SSL certificate file located on the drive that
will be uploaded.
Click Browser... to select the SSL key file located on the local drive that
will be uploaded.
Page 41
Nuclias Connect Configuration

SSL Certificate