Table of Contents
Advertisement
IMPORTANT SAFETY INFORMATION
Electrical
Warning!
1.
Products manufactured by us are safe and without risk
provided they are installed, used and maintained in good
working order in accordance with our instructions and
recommendations.
2.
THIS APPLIANCE POWER SHOWER MUST BE
EARTHED.
3.
In accordance with the current edition of 'The Plugs and
Sockets etc. (Safety) Regulations in force at the time of
installation, this Thermostatic Power Shower is intended to
be permanently connected to the fixed electrical wiring of the
mains system.
4.
DO NOT twist the individual cable cores of the live and
neutral conductors, as this will prevent them from entering
the terminal block.
5.
Make sure that any pipework that could become frozen is
properly insulated.The shower unit must not be fitted where it
may be exposed to freezing conditions.
6.
DO NOT operate this Thermostatic Power Shower if it is
frozen. Allow the unit to thaw before using again.
7.
If water leaks from the pressure relief valve, maintenance will
be required before the Thermostatic Power Shower can be
safely used.
8.
DO NOT fit any form of outlet flow control as the outlet.
9.
There are no user serviceable components beneath the
cover of the Thermostatic Power Shower. Only a competent
tradesperson should remove the cover.
8
Advertisement
Table of Contents
